Description
22256346 Volvo ECM Programmed for Volvo Penta Engines
22256346 Volvo ECM Programmed is the Volvo control module 22256346 that we supply already programmed for Volvo Penta engines. First, you send us the engine serial number. Then our engineers write the matching software onto the unit. Finally, we bench test the module and ship it to you.
What the Volvo Control Module Does
Volvo machines carry an ECM, or electronic control module, built by Volvo. It manages engine functions such as fuel injection timing, air intake and emissions control.
Moreover, it reads the sensors fitted around the engine and adjusts the operating parameters accordingly.
Because so much depends on that module, a failing unit can look like a mechanical problem. Therefore, many owners replace the module once a bench test confirms the fault.
Applications Covered by This 22256346 Volvo ECM Programmed
- Part number: 22256346.
- Engine or machine: Volvo Penta engines.
- Applications: Volvo Penta marine, industrial and generator engines.
- Supplied as: a module programmed to the engine serial number you give us.
How We Program the 22256346 Volvo ECM Programmed
We program every unit from scratch against the engine serial number that you provide. In addition, our team checks the software revision before the unit leaves the bench. However, we cannot confirm the exact machine the module will be fitted to, so a specialist technician should complete any extra configuration on site.
What You Get With Your Order
- A Volvo control module with the part number 22256346.
- Software written for the engine serial number you supply.
- A bench test carried out before we pack the unit.
- A one-year warranty on the module.
Information We Need Before You Order
- The engine serial number.
- The machine or truck model.
- The part number printed on your old module.
- A photo of the module label, when you have one.
Installation Notes for the 22256346 Volvo ECM Programmed
A qualified technician should install the unit with original diagnostic equipment. Some machines carry specific programming that can only be written on site, with the machine present. Therefore, plan the installation with a workshop that can finish that step.
Warranty and Support
Every service carries a one-year warranty. In addition, our engineers stay available by phone and email while you fit the unit.
Frequently Asked Questions
Do you need the engine serial number?
Yes. We write the software against that number, so we cannot start without it.
Is the 22256346 Volvo ECM Programmed ready to install?
It arrives programmed and tested. However, some machines still need a final setup on site.
Can you repair my old module instead?
Yes. We also run a bench repair service on the unit you already have.
Is there a warranty on the 22256346 Volvo ECM Programmed?
Yes. Every repair includes a one-year warranty.
Why Trust ECM Repair USA
Our engineering team has over 15 years of experience, more than 10K repaired ECMs and the latest simulation technology. Therefore, feel free to contact us before you order if you want to check the part number with us. ECM Engineering USA / ECM Repair USA Facebook | Linkedin | Twitter
